Motorola Eagle Ranger Flex - Manual (Page 6)

PG-2091F USER MANUAL VER:NEW ISSUE 6 OF 11
[If no message, all messages locked, or all messages unread, “CLEAR ALL?” function will
not be displayed in function options.]
Note: If you want to exit from functions selection without any changes, please press the Read
/ replace key
. The pager will automatically return to standby mode display in 8
seconds if no keys are pressed.
4.1. Receive and read messages
‹
Press the Read / replace key to read messages. If there’s no message stored in the
pager, “NO PAGES” will be displayed .
‹ When the pager has received messages, the number of unread messages will be displayed as
follows:
This display indicates 2 unread messages. An unread messages alert will remind you of
unread messages. The number at the bottom left corner shows the number of received
message. Press the read / replace key
to display the message.
◆ The first part of the message [ received message: 861 579 0234, time received: 13:53 noon of
April 27.]
The number at the bottom left corner shows its the 8th message. Press the Read / replace key
again to display time and date the message was received.
The number at the bottom left corner shows the 1st address code .
‹ Press the setting /selection key to read the next message.
‹ At any time when you are reading messages, pressing the function key for 5 seconds to
return to standby mode. Your pager can automatically store received messages along with
their time and date. When stored memory is full, “MEMORY FULL” indication will be
displayed in standby mode . Receiving of any new message will lead to permanent deletion
of the oldest and unlock message.