Electrolux U31175 LU4 9QQ - Manual (Page 12)

electrolux EXP09CS1WI front/rear view 9 electrolux EXP09CS1WI installation of window kit 9
Installation in a double-hung sash window
1. Connect the rain guards to the insect guard net.
• Insert all three projections on each rain guard into the
holes in the insect guard net.
• Side “A” will now be uppermost, as indicated in the
diagram.
. Attach the guard combined above to the window panel
• Push the insect guard net firmly to ensure that its
fourprojections fit into the holes in the window panel.
• Side “A” will now be at the top, as indicated in
thediagram.
Installation of window kit
Window kit is not supplied to all markets
3. Cut the foam seal A (adhesive type) to the proper length
and attach it to the window sill
4. Attach the window panel to the window sill
(A) If the inner width of the window is between 559mm and
609mm inclusive:
The window panel cannot be installed in windows less
than 559mm wide, as you will be unable to shut the
exhaust cover.
In such cases the exhaust cover will have to be removed
prior to installing the window panel.
• Remove the adjustment panel from the window panel,
and cut the window panel to the same width as the
window
• Open the window sash and place the window panel
on the window sill
• Secure the window panel to the window stool with
screws
Projection
Window panel
“A”
Projection
Insect guard
net
“A”
Hole
Foam seal A
(adhesive type)
Exhaust cover
Window
panel
Adjustment panel
Window panel
Window sill
559mm - 609mm
Cut