Equator WB 65 - Manual (Page 18)

Installation Instructions
18
Preparation of the Dishwasher
Fitting the Adjustable Feet
• The dishwasher comes pre-fitted with adjustable feet.
• Adjust the feet as needed to:
1. Obtain the desired overall machine height.
2. Properly level the dishwasher.
Important: The dishwasher must be completely level in its finally installed position for proper
door sealing and dishwasher operation.
Fitting a Decorative Door Panel
To enhance the appearance of the dishwasher, a decorative door panel can be installed within
the existing outer door frame.
The acceptable dimensions of a locally sourced insert panel are:
Width: 23 1/8"
Height: 23 1/2"
Thickness: 1/8" max.
Procedure:
• Remove the door frame from the dishwasher by loosening the screws as shown in the
illustration.
• Prepare the panel according to the measurements given.
• Position the panel you have chosen and tighten the screws back into the frames.