Equator WB 65 - Manual (Page 17)

Important - Take care when handling the dishwasher to avoid potential injury due to possibly
exposed sharp edges.
Unpack the Dishwasher
• Remove carton and any internal packaging material from within the dishwasher.
• Unclip the power cord, fill and drain hoses from the rear.
• Carefully lay dishwasher on its back taking care not to damage hoses or power cord and
remove the wooden pallet by removing the 4 screws in the base.
• Open the dishwasher door and remove the two screws securing the press-board top panel.
Preparation of the Cabinet
• See below for dimensions of cabinet opening and dishwasher.
• Connection points for electrical, water and drain lines must be situated in an adjacent
cabinet for easy access and within dimensional specifications.
• The floor within the cabinet opening must be at the same height as the floor surface in the
surrounding room area.
Cabinet Opening Dimensions
Width
23 5/8" min. to 24" max.
Depth 22" min.
Height 32 3/8" min. to 34 5/8" max.
Connections
Electrical:
Locate power outlet within 3' of the cabinet partition adjacent to the dishwasher.
Water: Locate water shut-off valve within 2' of the cabinet partition adjacent to the dishwasher.
Drain: Locate the drain line connection point within 1' of the cabinet partition adjacent to the
dishwasher.
Installation Instructions
17