Equator WB 65 - Manual (Page 11)

Important - Disconnect the electrical supply to the
dishwasher before performing any maintenance or
cleaning.
Wash Filter
Check the wash water filter, located in the base of
the tank, regularly to ensure it is clear of debris.
Cleaning is easily accomplished by removing the filter
as an assembly and holding it under running water.
Care and Maintenance
Removal & Cleaning - Unlock the circular filter
assembly from the bottom of the tank by rotating
counter-clockwise and lifting on its handle. No
further disassembly is necessary.
Clean all three filters under running water. Use a
hard brush, if necessary, to loosen difficult to remove
deposits.
Replace filters after cleaning.
Important - it is essential that all filters are
clean for the dishwasher to function properly.
Spray Arms- The upper and lower spray arms
should be checked for blockage or obstruction
if ever a decline in wash performance is
noticed.
Upper Spray Arm:
1. Slide the upper basket out from inside the
dishwasher.
2. Undo the round nut located in the middle of the
spray arm.
3. Remove the spray arm, by holding in the middle
and pulling down.
4. Wash out any debris or food deposits from the holes
in the spray arm under running water.
5. Replace in reverse order.
Lower Spray Arm:
1. Remove the lower basket from the dishwasher.
2. Remove the round ring nut at the center of the spray
arm.
3. Pull the spray arm out by grasping the center of
the spray arm and lifting.
4. Wash out any debris or food deposits from the
holes in the spray arm under running water.
5. Replace in reverse order.
Stainless Steel Care - Periodically wipe the
tank and door of your dishwasher with a
damp cloth. Never use metal scouring pads
such as Brillo® or S. O. S.® as they will
scratch the stainless parts and/or leave
particles that will rust.
11