GE 8,050 BTU Smart Window Air Conditioner Installation Instructions - Manual (Page 7)

49-5000433
7
ECO Mode
This mode optimizes the cooling power of your air
conditioner, thereby saving you energy. Once the set
point temperature has been reached, the fan will cycle
off to save energy. The fan will cycle back on periodically
to insure all cooling capacity in the system is used. This
mode is the default mode for the unit. Each time the
unit is powered off, it will restart in ECO mode ON. This
includes Delay timer mode. The first time the unit is
turned on, the settings will be 70° and Low fan. You can
adjust the fan speed and temperature to your personal
comfort. ECO ON— Helps minimize electricity use. It is normal
for the fan to cycle off and then back on in this mode.
7KLVRQRIIF\FOHFDQUHSHDWPXOWLSOHWLPHV%HFDXVH
the fan will cycle off, you may notice a variation in room
temperature and humidity.
ECO OFF— When this mode is not engaged, the fan will
run continuously, and in Cool mode the compressor will
cycle on and off to maintain room temperature.
Fan Only Mode
8VHWKH)DQ2QO\0RGHDW/RZ0HGRU+LJKIDQVSHHG
to provide air circulation and filtering without cooling.
Since fan-only settings do not provide cooling, a Set
temperature cannot be entered. The room temperature
will appear in the display.
NOTE: Auto Fan Speed cannot be used when in the Fan
Only Mode.
Auto Fan Speed
Set to Auto fan speed for the fan speed to automatically
set to the speed needed to provide optimum comfort
settings with the set temperature. If the room needs more cooling, the fan speed will
automatically increase. If the room needs less cooling,
the fan speed will automatically decrease.
NOTE: Auto Fan Speed cannot be used when in the Fan
Only Mode.
USING THE
A
IR CONDITIONER
Controls
Power Outage Recovery Feature
In the case of a power outage or interruption, the unit will
automatically restart in the settings last used after the
power is restored.
Air Direction
8VHWKHOHYHUWRDGMXVWWKHDLUGLUHFWLRQOHIWDQGULJKW
only.