GE 8,050 BTU Smart Window Air Conditioner Installation Instructions - Manual (Page 13)

49-5000433
13
Installation Instructions
INST
ALLA
TION INSTRUCTIONS
6. INSTALL THE AIR CONDITIONER
IN THE WINDOW
A.
Place the air conditioner on the sill with the
bottom mounting rail against its back edge.
Center it and close the window securely behind
the top mounting rail. It should be level or
VOLJKWO\WLOWHGWRWKHRXWVLGH8VHDOHYHODERXWD
EXEEOHZLOOEHWKHFRUUHFWFDVHVODQWWRWKH
outside.
B.
Extend the left and right accordion panels to the
vertical window sashes and attach, through the
holes in the panels, with 3 Type B screws, as
appropriate.
C.
(This step is for
AEW10 and AEW12
models only.)
Install the frame locking
brackets between the
bottom of the accordion
panel and the window sill. Attach with 2 screws.
NOTE: To prevent the window sill from splitting,
drive the pilot holes before driving the screws.
7. INSTALL SUPPORT BRACKET
AND FOAM TOP WINDOW
GASKET
A.
CAUTION
To
prevent broken glass or
damage to windows, on
vinyl or other similarly
constructed windows,
attach the window locking
bracket to the window side
jamb with one screw.
B.
Cut the foam top window
gasket to the window width.
C.
Stuff the foam
between the glass
and the window
to prevent air and
insects from getting
into the room.
NOTE: If the
gasket supplied does not fit your window, obtain
appropriate material locally to provide a proper
installation seal.
Wood
Vinyl
2 Frame locking brackets
3 Screws