EnGenius Technologies EnGenius 11b/g Wireless SOHO Router 1.2 - Manual (Page 25)

25
ƒ Enable uPNP: Place a check in this box to enable UPnP. It is recommended to
enable this feature as it’s used by several applications.
ƒ Enable PING Access on WAN: Place a check in this box if you would like the device
to be pinged from the WAN side (ISP).
ƒ Enable Web Sever Access on WAN: Place a check in this box if the static IP
address if used for a web-server.
ƒ Enable IPsec pass through on VPN connection: Place a check in this box to
enable the pass through of IPsec packets on a VPN connection.
ƒ Enable IPsec pass through on VPN connection: Place a check in this box to
enable the pass through of PPTP packets on a VPN connection.
ƒ Enable IPsec pass through on VPN connection: Place a check in this box to
enable the pass through of L2TP packets on a VPN connection.
ƒ Click on the Apply Changesto save the changes.
WAN Settings – PPPoE
ƒ Click on the WAN link on the navigation drop-down menu. This feature allows you to
configure the WAN interface using a static IP address, DHCP Client, PPoE, or PPTP.
A PPPoE service requires a user name and password to log into the Internet and is
usually a DSL service.
ƒ WAN Access Type: Select PPPoE from the drop-down list. This type of connection
is usually used for a DSL service and requires a username and password to connect.
ƒ User Name: Specify the user name which is provided by your ISP.
ƒ Password: Specify the password which is provided by your ISP.
ƒ Service Name: Specify the name of the ISP.