EnGenius Technologies EnGenius 11b/g Wireless SOHO Router 1.2 - Manual (Page 14)

14
Time Zone Setting
ƒ Click on the Time Zone Setting link in the navigation menu. This feature allows you
to configure, update, and maintain the correct time on the device’s internal system
clock as well as configure the time zone. The date and time of the device can be
configured manually or by synchronizing with a time server.
Note: If the device losses power for any reason, it will not be able to keep its clock
running, and will not display the correct time once the device has been restarted.
Therefore, you must re-enter the correct date and time.
ƒ Current Time: You may specify the date and time manually, if you choose not to use
the Network Timing Protocol (NTP)
ƒ Time Zone: Select a time zone from the drop-down list
ƒ Enable NTP client update: Place a check in this box if you choose to enable the
NTP client service.
ƒ NTP Server: Select a service IP address from the drop-down list or manually assign
the IP address of the NTP server.
ƒ Click on the Apply Change to save the changes or the Reset button to clear the
fields.