Whirlpool 27 Inch Gas Smart Dryer Use and Care Guide - Manual (Page 11)

11
7.
Touch and hold START/PAUSE
to begin cycle
Touch and hold START/PAUSE to begin the cycle.
8.
Remove garments promptly
after cycle is fi nished
Promptly remove garments after cycle has completed
to reduce wrinkling. You can also save the last run cycle
as a favorite by touching the (FAVORITES) button.
6.
Use Tools button to change
other settings, if desired
The Tools button gives access to many other settings, utility
cycles, preferences, and information. Touch the TOOLS button
to access the Tools screen, which contains the following
(you will need to scroll down with your fi nger to access
all of the selections).
Control Lock
Press this icon to lock the controls. Swipe up to unlock.
Mute
Press this icon to mute or unmute sounds.
Utility Cycle
Steam Refresh
Select Steam Refresh to reduce odors and light wrinkles in
dry loads consisting of wrinkle-free cotton, cotton-polyester
blends, common knits, and synthetics. If you will be unable
to remove a load immediately, touch WRINKLE SHIELD to
add up to 150 minutes of periodic tumbling. You may select
the + Steam setting to add a short steam cycle after
60 minutes to help smooth out wrinkles.
Preferences
Press to access Times and Dates, Sound Volume, Display
Settings, and Regional. Follow the screen prompts.
WiFi
Press to access Connect to Network, SAID Codes,
Mac Address, and WiFi. Follow the screen prompts.
Info
Press to access Service & Support, Store Demo Mode,
Restore Factory, WiFi Terms and Conditions, and Software
Terms and Conditions. Follow the screen prompts.
/ / / / / / / /