Whirlpool 27 Inch Gas Smart Dryer Use and Care Guide - Manual (Page 10)

10
First select a cycle from the “What to Dry” (automatic cycles)
options; then select a “How to Dry” option to get the best
combination cycle available for the type of items you are
going to dry. You may also select the Sanitize cycle for a long,
high-heat cycle which has been proven to reduce household
bacteria. The Sanitize cycle overrides previous selections and
cannot be modifi ed. See “Cycle Guide” for cycle details. Not
all cycles are available on all models.
Automatic Cycles
You can select a different dryness level, depending on your
load. Touch SET AUTO-DRYING LEVEL, then touch the screen
to choose between More, Normal, or Less to adjust the
dryness level at which the dryer will shut off. Dryness level
can be changed in the fi rst 5–8 minutes of the cycle.
Automatic cycles give the best drying in the shortest time.
Drying time varies based on fabric type, load size, and
dryness setting.
NOTE: Automatic cycles will give you up to four temperatures
to adjust, depending on the “What to Dry” or “How to Dry”
selections that have been made.
Timed Dry Cycle
When you select Timed Dry, the default time appears in
the display. To change the drying time, touch TIMED DRY
or QUICK DRY, then touch the screen to choose a new
drying time.
The default temperature may be changed by touching
TEMPERATURE, then touching the screen to adjust the
temperature.
Wrinkle Shield ™
The Wrinkle Shield ™ option will periodically tumble the load
after the end of the cycle for up to 150 minutes. Touch
WRINKLE SHIELD option , then touch “ON” to activate this
option. Wrinkle Shield ™ option may be ended at any time by
touching the
“X” on the touch screen to the right of the estimated time
remaining.
From the home screen, touch the Options icon (at upper right
of screen) and the Options screen will show Static Reduce,
Damp Dry Signal, and/or EcoBoost ™ (depending on cycle).
NOTE: Not all options and settings are available with all cycles.
Damp Dry Signal
Touch to turn the Damp Dry Signal on or off. When selected,
a series of beeps will sound when the load is damp, but not
completely dry. This will allow you to take clothes out of the
load that do not need to dry completely. This option is available
on some cycles. The Damp Dry Signal is selected as a default
for the Bulky Items/Normal, Bulky Items/Wrinkle Control, and
Bulky Items/Heavy Duty cycles, as a reminder to manually
reposition bulky loads midway through the cycle.
Static Reduce (on some models)
Touch to add the Static Reduce option to selected
automatic cycles. The dryer will automatically tumble,
pause, and introduce a small amount of moisture
into the load to help reduce static. This option adds
approximately 3 minutes to the total cycle time.
EcoBoost ™ Option
Touch to activate the EcoBoost ™ option, which allows you
to increase your energy savings by using a slightly lower heat
level. This will increase drying times. The EcoBoost ™ option
is only available on the Regular/Normal cycle and defaults on.
4.
Select cycle and modifi ers
Temperature
LOW
Set Auto-Drying L...
NORMAL
Wrinkle Shield
OFF
What to Dry
REGULAR
How to Dry
NORMAL
4:28
0:45
5.
Select any additional options