Summit 1.2 cu. ft. Built-In Drawer Microwave Installation Guide - Manual (Page 9)

9
Drawer Installation
1. Place the drawer adjacent to the wall or cabinet opening. Plug the power supply cord into the
electrical outlet.
2. Carefully guide the drawer into the prepared opening. Avoid pinching the cord between the
oven and the wall.
3. Slide the drawer all the way until the mounting flange is flush with the face of the cabinet. See
Figure 5.
4. Open the drawer. Using the 4 holes on the drawer as a template, predrill the cabinet using a
1/16" bit. See Figure 5.
5. Secure the drawer with the 4 screws supplied. See Figure 6.
4 Screws
Figure 6