Summit 1.2 cu. ft. Built-In Drawer Microwave Installation Guide - Manual (Page 11)

11
Clearances and Dimensions
•
Dimensions that are shown in
Figure 1 must be used. Given
dimensions provide minimum
clearance. Locate the
electrical outlet in the shaded
area in the upper left-hand
corner of the cutout. See
Figure 3.
•
Contact surface must be solid
and level. Pay special
attention to the floor on which
the Microwave Drawer will sit.
The floor of the opening
should be constructed of
plywood strong enough to
support the weight of the oven
(~100 pounds).
•
Check the location where the
Microwave Drawer will be
installed for proper electrical
supply
•
Your oven can be built into a
cabinet or wall by itself or
under a gas or electric wall
oven.
•
Be sure that the clearance of
the floor between the wall
oven and the microwave
drawer is a minimum of 2-
inches.
•
The microwave interior will
easily accommodate a 9" x
13" oblong dish or a bag of
microwave popcorn.