Summit 1.2 cu. ft. Built-In Drawer Microwave Installation Guide - Manual (Page 10)

10
Countertop Installation
Remove all packing material and accessories.
Examine the oven for any damage such as
dents or broken door. Do not install if oven is
damaged. Cabinet: Remove any protective film found
on the microwave oven cabinet surface.
Do not remove the light brown Mica cover
that is attached to the oven cavity to
protect the magnetron.
Installation
1.
Select a level surface that provides
enough open space for the intake
and/or outlet vents.
12 inches(30cm)
(3) Blocking the intake and/or outlet openings
can damage the oven.
(4) Place the oven as far away from
radios and TV as possible.
Operation of microwave oven may
3.0 inch(7.5cm)
3.0 inch(7.5cm)
OPEN
cause interference to your radio or TV
reception.
2. Plug your oven into a standard household
outlet. Be sure the voltage and the
frequency are the same as the voltage
and the frequency on the rating label.
WARNING: Do not install the oven over a
A minimum clearance of 3 inches (7.5cm)
is required between the oven and any
adjacent walls. One side must be open.
(1) Leave a minimum clearance of 12
inches (30cm) above the oven.
(2) Do not remove the legs from the
bottom of the oven.
range cooktop or another heat-producing
appliance. If installed near or over a heat
source, the oven could be damaged, and
the warranty would be void.
The accessible surface
may be hot during
operation.