Interface connections, Usb 3.0, 1 ~ 16 poe – Vivotek ND9542P 32-Channel 4K UHD NVR (No HDD) User Manual
Page 22: Di/do, Vivotek - built with reliability, Lan/wan, 22 - user's manual
VIVOTEK - Built with Reliability
22 - User's Manual
Interface Connections
10-1. Connect to a monitor using an HDMI cable. VGA is also supported.
10-2. Connect CAT5e or better-quality Ethernet cable to the GbE Ethernet port.
10-3. Connect USB devices such as, mouse, keyboard, USB optical drive, or USB thumb drive
(formatted in FAT format), joystick, or UPS.
10-4. Connect external devices, such as sensors, relays, or alarms to the terminal block.
10-5. Connect the system to the power mains.
3
If you connect external USB storage, connect it to the USB 3.0 port (at the back of the
chassis).
NOTE:
8
7
6
5
4
3
2
1
USB 3.0
AUDIO OUT
AC IN
100~240V
AUDIO IN
+
-
RS485
NET 1
1
2
NET 2
4
6
8
10
12
14
16
3
5
7
9
11
13
15
16
15
14
13
12
11
10
9
Camera 01
Camera 02
Camera 03
Camera 04
Camera 06
Camera 05
Camera 07
Camera 08
Camera 09
AC100~240V
50/60Hz
LAN
USB 3.0
LAN/WAN
#1 ~ 16
PoE
DI/DO