Section two, Management over a web console, Section two management over a web console – Vivotek ND9542P 32-Channel 4K UHD NVR (No HDD) User Manual
Page 171: Vivotek - built with reliability, Web console, User's manual - 171, Lan / wan
VIVOTEK - Built with Reliability
User's Manual - 171
Section Two
Management over a Web Console
Below are the requirements for using a web console:
1. i5 CPU or above with a minimum of 8GB RAM.
2. It is recommended to configure a sub stream in H.264, with a lower resolution of 640 x 360.
3. Use Google Chrome for the plug-in free access.
LAN / WAN
Web console
8
7
6
5
4
3
2
1
USB 3.0
AUDIO OUT
AC IN
100~240V
AUDIO IN
+
-
RS485
NET 1
1
2
NET 2
4
6
8
10
12
14
16
3
5
7
9
11
13
15
16
15
14
13
12
11
10
9
Note that when accessed over the network, the total streaming throughput is 24Mbps.
Access via an IPv6 address is supported by firmware revision 3.1. Note that for some
browsers you should use the [ and ] brackets to surround the IPv6 address such as:
http://[2001:db8:1234::abcd]
.
There are two different interfaces on the system:
1. One is connecting mouse and keyboard, and an HDMI cable to a TV screen or monitor.
The
local management thus made is described in the
User Manual
of each NVR model
.
2. The other is accessed through the Ethernet connection. Management via a web console is
described in this manual.