System and memory requirements, Setting up the scanner – Epson ActionScanner II User Manual

Page 5

System and Memory Requirements

For the scanner and your software to work properly, your

system must include the following minimum configuration:

Apple® Macintosh or Power Macintosh™ computer with a

68030 or 68040 processor

Apple system software 7.0 or higher

8MB of system RAM; 4MB of application RAM

Note:

8MB is the minimum amount of RAM; graphics applications run

faster

and more efficiently with at least 12MB of RAM.

At least 100MB of free hard disk space for scanner

applications and images, depending on the size of the

images

A color monitor (one with a 24-bit video card is

recommended)

For PhotoDeluxe, a double-speed or faster CD-ROM drive.

Setting Up the Scanner

Follow these steps to set up the scanner:

1. Take the scanner out of its box and place it on a flat, stable

surface with the rear panel facing you.

2. Remove the tape securing the scanner cover and pull out

the paper underneath the cover.