Eclipse - Fujitsu Ten CD8053 - Manual (Page 87)

87
How to operate the Sound Adjustment Mode
Mid-Band (Group-1) Parametric adjustment in 5-Bands of 25
Frequencies.
Hi-Band (Group-2) Parametric adjustment in 5-Bands of 20
Frequencies.
Eclipse has by default assigned arbitrary frequencies for each
of the 5-Bands (Hi/Mid for 10 parametric bands total).
Example: If you want the Hi-Group H-1 location to have a
parametric frequency of 1.25kHz.
Because this frequency is in use by M-5 you must first assign
M5 a new frequency, this will release the band for use in the
Hi-Group H1 at 1.25kHz.
PARAMETRIC EQUALIZER ADJUSTMENT (PEQ)
ATTENTION
Frequencies in each group (Mid-Group or Hi-Group) cannot be
duplicated (repeated).
Release a frequency from its location, before it can be re-
assignment (available again for use in another band).
Mid Group
Hi-Group