Eclipse - Fujitsu Ten CD8053 - Manual (Page 37)

You can change the details that are shown in display mode in
the following way.
Press the [DISP] button for one second or more. Each
time the button is pressed in this way, the display
switches between A mode and B mode.
A mode: In this mode, the preset button functions are
displayed.
When in tuner mode, the preset frequencies are
displayed next to buttons [1] to [6] and these
frequencies are highlighted when those signals
are being received. When in disc mode, the
button functions such as [SCAN], [RPT] and
[RAND] that are used in disc mode are displayed
next to buttons [4] to [6].
B mode: In this mode, the preset button functions are not
displayed.
1
37
Basic operation
Changing the display mode
Operation assist function
In display adjustment mode, function mode and sound
adjustment mode, the screen displays and button illumination
help to guide you in carrying out operations.
The buttons that are
used for adjustment
operations flash.
Buttons [1] to [6]
[DISP] button
The function button
selected for adjustment
is displayed