Eclipse - Fujitsu Ten CD8053 - Manual (Page 124)

124
Mounting instruction
Mounting the main unit
Insert the mounting sleeve into the opening in the vehicle
console.
1
Use a screwdriver or a similar tool to bend the tabs in the
mounting sleeve to secure the mounting sleeve.
2
Attach the side brackets to the main unit using phillips
type screws. 3
BEND THE MOUNTING
TABS.
DASH BOARD
OR CONSOLE
MOUNTING
SLEEVE 2
MAIN UNIT 1
SIDE BRACKETS [ x 2 ] 3
PHILLIPS TYPE
SCREWS [ x 2 ]
(5 x 8mm) 9
Mounting instruction
O Note O
Be sure to install the back strap to support the main unit. Failure
to install the back strap correctly may cause CD skipping.