Eclipse - Fujitsu Ten CD8053 - Manual (Page 82)

82
How to operate the Sound Adjustment Mode
Press the [RTN] button.
Other time alignment items can be set at this time.
Press the [RTN] button.
At this time, other adjustments can also be made in normal
mode.
Press the [SOUND] button for less than one second to
exit sound adjustment mode. 6
5
4
Tweeter settings (Tweeter)
You can select the tweeter installation location and whether or
not a tweeter is being used or not, allowing you to select the
optimum time alignment settings automatically.
Turn the [SEL] button to select Tweeter.
The selected item will be highlighted.
Press the [SEL] button.
The mode will change to tweeter setting mode.
Turn the [SEL] button to select the setting item.
When the button is turned, the setting item changes in the
following order and the selected item is highlighted.
3
2
1
NO Dash Door
[SOUND] button
[RTN] button
[SEL]
button
ATTENTION
If the front speakers have been installed to the dash panel, you
can set the tweeter setting to "Dash" even if no tweeter has been
installed.