Eiki EIP-25 - Manual (Page 24)

23
Lamp Reset Resets the lamp timer after
replacing the lamp module.
• Press right button, then it
will display the message
stating “Press Auto/Enter
button, reset the lamp
timer” to confirm that the
user has replaced the
lamp. After replacing the
lamp, please press
“Auto/Enter” button. Or
otherwise, press “Menu”
button or the “Esc” on
remote control.
Auto Adjust Automatically adjusts the display
image to the ideal settings for the
display source.
• Select Yes, and the
brightness and contrast
value will be adjusted
automatically each time
you press “Auto” button.
• Select No, the brightness
and contrast value is fixed
and unchanged.
Reset All Returns all settings to the factory
defaults.
• Press right button.
Source type Switches between available vide
input sources.
• Press button to
choose.
* Press “Auto” button to return to previous setting.