Section 5: digital performer, Section 5, Digital performer – Euphonix MC Mix User Manual
Page 14: Artist series, Digital performer 14
professional control surfaces
Artist Series
EuCon APPLICATION SETUP GUIDE
DIGITAL PERFORMER
14
Section 5: Digital Performer
NOTE: Digital Performer version 6.01 or higher is required. Download the latest version
of Digital Performer from MOTU’s web site. Digital Performer must be installed
prior to installing EuControl.
For Digital Performer to communicate with Artist devices, the EuCon driver must
be added in the Control Surface dialog.
1.
Open Digital Performer.
2.
Choose
Setup->Control Surface Setup.
The Control Surface dialog opens.
Figure 5-1 Control Surface dialog
3.
Click the
+ button (add) on the right.
A pull-down list with Drivers appears with EuCon at the top.