EnGenius Technologies SN-920 User Manual

Page 33

~ 60~

Dial Prefix

Press "Menu", "5", "8" to access the Dial Prefix screen.
Allows you to enter up to an eight-digit dialing prefix (i.e.:
1010555 for long distance service).

Use the UP/DOWN scrolling keys to toggle between the Yes or
No Dial Prefix default selection. Press the RING SOFT FUNCTION
key to select "Edit" then enter the Dial Prefix number via the
keypad. Press the LEFT SOFT FUNCTION key to select "Save".

If you have elected to use a Dial Prefix, enter a phone number,
prior establishing dial tone, then press the " TALK" Key. The
screen will ask you "Use Prefix?" select "Yes" by pressing the LEFT
SOFT FUNCTION key or select "No" by pressing the RIGHT SOFT
FUNCTION key.

~ 59~

2. The scrolling keys may
be used to select a base unit number
from 1 to 4. Pressing the RIGHT SOFT
FUNCTION key moves the from
YES to NO and back to YES in the
selection process.
Pressing the LEFT SOFT FUNCTION
key will save the setting.

3. Repeat the process until all base units
from which calls are to be accepted
have been selected for the handset.

Press "MENU", "5", "7" to access Contrast screen.
This option adjusts the contrast
for the handset's LCD screen.

1. While in the Settings Menu, select
the " " key from the keypad. The
LCD will display the current contrast
setting:

2. Use the scrolling keys to
change the contrast setting from 1 to
16 (1 is the lightest setting and 16 is
darkest).

3. The LEFT SOFT FUNCTION key will
save the new setting. Press END to
return the handset to the Settings
Menu. Pressing END again returns
the handset to the Main Menu.

Contrast

Contrast:12
Adjust=¡х ¡ф

SAVE