EnGenius Technologies SN-920 User Manual
Page 30
~ 53~
To make use of this option you must subscribe to both Call
Waiting and Caller ID service with your local telephone company.
* When on a call, you will be alerted to an incoming call with a
short beep. The phone number and name of the incoming
caller will be displayed simultaneously.
* You can place the first call on hold and answer the second
call by pressing TALK. Pressing TALK again will switch back
to the first call.
Caller ID with Call Waiting Option
Sound
Press "MENU", "4", "1" to access Ring
Volume menu.
1. From the IDLE mode press the
RIGHT SOFT FUNCTION key to
enter the Main Menu:
2. Select the SOUNDS option by
pressing the "4" key from the
keypad.
3. Select RING VOLUME by pressing
"1".
4. Once in this option, the current ring
volume level will be displayed on the
second line of the LCD:
Ring Volume
Sounds Menu
1.Ring Volume
2.Ring Type
3.Key Volume
4.Key Volume Tone
Ring Volume
High
¡
ф ¡
х
SAVE
Main Menu:
1:KEY GUARD
2:DIRECTORY
¡
х ¡
ф
3:CALLER ID
4:SOUNDS
5:SETTINGS
6:REGISTER
~ 54~
5. Ring levels are: HIGH, LOW and
VIBRATE. Use the scrolling keys
to select ring level. Press the LEFT
SOFT FUNCTION key to SAVE
setting.
6. Selecting END returns handset
to the Sounds Menu.
Press "MENU", "4" , "2" to access Ring Type menu.
O ne of four distinctive ring tones may be selected for the handset
by pressing the or scrolling keys and pressing the
LEFT SOFT BUTTON to save.
The key volume is the loudness of the sound of the keys when
pressed . Choices are: HIGH, LOW and OFF.
The key tones are the type of sound that the keys produce when
pressed. Choices are Tone 1, Tone 2, Tone 3 and Tone 4.
Ring Type
Key Volume
Key Tone
Press "MENU", "4" , "3" to access Key Volume menu.
Press "MENU", "4" , "4" to access Key Tone menu.
Settings (Setting Handset Preferences)
This menu option can be used to set: local area code, dial mode,
and the backlight. Selecting reset within this option allows you to
reset these preferences (plus all sound settings) back to the
factory settings. Custom Name is the name that appears on the
LCD in the IDLE mode.