Ericsson T18di - Manual (Page 37)

Menu Descriptions 33
No
t f
or
co
m
m
er
cia
l u
se
- E
ric
ss
on
In
c. Setting Up Your Calling Cards
To set up your calling cards, make sure you have the Calling Card
Access Numbers (numbers provided by your long distance carrier)
and the Verification Numbers (numbers you must enter to allow the
calling card call to be completed)
To set up your calling cards, complete the following steps.
1 Press ë or î from the Standby screen to access the main menu.
2 Press YES when the PHONE LISTS menu is highlighted.
3 Press ë or î until the Calling Card 1 or Calling Card 2 sub-
menu is highlighted.
4 Press YES to open one of the Calling Card submenus.
You are prompted to enter your security code.
5 Press ë or î until Verif Number is highlighted.
6 Press YES to select Verif Number.
7 Enter the calling card verification number.
8 Press YES to store the number.
9 Press î to highlight Access Number.
10 Press YES to select Access Number.
11 Enter the calling card access number.
12 Press YES to store the number.
Changing the Domestic or International Calling
Pattern
If your long distance carrier requires a unique dialing sequence, you
may need to change the calling pattern. The calling pattern
determines when the numbers are transmitted by your phone. The
default calling pattern is:
• Access number
• Stop
• Verification number
• Stop
• Area code and phone number
To change the calling pattern:
1 After Step 11 under Setting Up Your Calling Cards, press î until
Domestic or International is highlighted.
2 Press YES to select the highlighted option.
3 Press î to scroll through the calling pattern order.
4 To change the calling pattern order, press î until the the setting
you want to change is highlighted.
5 Press 1 to scroll through the options for that setting.
6 When you have the calling pattern order you want, press YES to
store the selection.