EverFocus EVS200A/AW - Manual (Page 43)

EVS200A/AW
43
4.8.4 Serial Communication
RS485 Setting
Baud Rate: This field is to set the speed at which is used to transmit instruction or
information through the RS485 port on the camera. There are six different speeds,
2400/4800/9600/19200/38400/57600. (Default: 9600)
Data Bit: This field is the data bit at which you will be transferring. There are two
settings for this option: 8 or 7. (Default: 8)
Stop Bit: This field is to set the stop bit for the RS485 connection. There are two
different stop bits, 1 or 2. (Default: 1)
Parity: This field is to select the parity level at which you will be connected. You can
choose between None, Odd, or Even parity levels. (Default: none)
Press Apply to apply the setting changes or Reset to reset without saving the change.