EverFocus EVS200A/AW - Manual (Page 34)

EVS200A/AW
34
1. Click
button in Event page.
2. Enter an event name for the event, e.g. Event 1
3. Select “Manual Trigger” as event type.
4. Select “Upload to FTP” as action type.
5. Check “Enable Pre-alarm Buffer” and “Enable Post-alarm Buffer”. For pre-and
post alarm buffer setting, please refer to “4.7.3 Alarm”.
6. Check “Enable This Event”.
7. Select “Always” for time mask. For detail about Time Mask, please refer to
“4.7.4 Time Mask”.
8. Record Channel: Select which channel to be recorded when event occurs. It is
selectable from Channel 1 and Channel 2.
9. Click
to save this event in event list, or to cancel the
settings.