Elation Professional 36 PRO - Manual (Page 31)

DESIGN LED 36 Pro™
©Elation Professional, Los Angeles Ca. 30 www.ElationLighting.com
• To test the program access “Program Test” in the “Program Edit” menu function.
Step 3 – Playing a Program
To initiate a program follow the procedure below:
• Access the main menu and use the “Up” and “Down” to toggle to “Function Mode”
and tap the “Enter” button.
• In the next screen select “Auto Program” and tap the “Enter” button.
• There are now two selections, “Master” and “Alone.” Select “Master” when running
multiple fixtures in a master/slave configuration. See section 10.2 “Master/ Slave
Operation” on page 26 for proper set-up instructions. Select “Alone” when running a
single fixture or when multiple fixtures in stand-alone mode. See section 10.1
“Stand-Alone Operation” on page 26 for proper set-up instructions.