Elation Professional 36 PRO User Manual
Page 22
DESIGN LED 36 Pro™
©Elation Professional, Los Angeles Ca.
21
www.ElationLighting.com
visualization when the fixture is mounted in an inverted position.
“d ON” – The display is designed to turn off during normal operation to avoid
excessive light in situations that require an extremely dark environment. This
function will adjust the time delay the fixture will remain on before it turns off. This
function is disabled as default.
8.2 “SEt” – Fixture Personality Settings:
These functions set specific running modes and operating parameters.
This function allows the fixture to run in different DMX channel modes. Three modes are
available; 3 channel, 4 channel, or 6 channel. See “DMX Traits” on page 31 for a
detailed explanation of the different DMX modes.
This function allow for different dimmer curves to be adjusted. Mode 1 (Mod1) allows for
quicker dimming and Mode 2 (Mod2) allows for smoother dimming which more closely
simulates a tungsten dimming curve.
This function dictates how the fixture will operate in the event DMX signal is suddenly
lost while operating in DMX mode. The three fail safe modes are; 1) “OFF” which will
blackout all light output. 2) “HOLd,” which will hold the last DMX command, or 3) “AUtO,”
which will put the fixture in sound-active mode.
This function is used to restore the factory settings of the device. All settings will be set
back to the default values (shaded). Any edited scenes will be lost.
This function will display the current firmware version.