Elation Professional 36 PRO User Manual
Page 20
DESIGN LED 36 Pro™
©Elation Professional, Los Angeles Ca.
19
www.ElationLighting.com
Note:
1) If the fixture does not receive a DMX signal the menu display will flash repeatedly.
2) SPED: Adjust the hold time for each scene in built-in chase programs.
3) FADE: Adjust the fade time between each scene in the built-in programs.
8.1 “MOdE” - Function Mode:
8.1.1
fixture’s starting DMX address. Every device controlled by DMX has to have a unique
starting address. The addressing feature is what allows DMX to function properly. The
DMX address of a fixture is what allows it to communicate with a controller properly. The
DMX addressing also allows the fixture to ignore any DMX information coming from the
controller that is not meant specifically for the fixture. Because each fixture is connected
in a daisy-chain fashion it is imperative to assign a proper and unique starting DMX
address to each and every fixture. The DMX address is non-destructive and will remain
in the fixture’s memory even when the power to the unit is switched off. Memory is
backed-up and retain by an internal power source that should last about five years. For
proper DMX addressing see Section 9/Page 33 of this user manual.
“VALU” - Display the DMX 512 value of each channel
With this function you can display the DMX 512 value of each channel. The display
will automatically detail the changing DMX values as they are received from the
MOd1 /Mod2
Dimmer Mode
OFF/HOLd/AUtO
Status while there is no DMX
ON/OFF
Default setting
V-1.0~V-9.9
Software version
MANL
~
01 XX(00~FFH)
06 XX(00~FFH)
Manual adjust intensity
0000~9999(hours)
Total running hours
CXXX
Password used to clear run
time ”038”
tIME
ON/OFF
Clear fixture run time
S-01~S-48
Select steps of program
C-01~C-06
01 XX(00~FFH)
06 XX(00~FFH)
FAdE
XXX
EdIt
~
tIME
XXX.X(000.1s~999.9
s)
Edit the internal scenes