Elation Professional 36 PRO User Manual

Page 30

DESIGN LED 36 Pro™

©Elation Professional, Los Angeles Ca.

www.ElationLighting.com

“Green” – adjust the magenta flag value

“Blue” – adjust the yellow flag value

“Strobe” – adjust the strobe

“Dimmer” – adjust the dimmer intensity

“Scene Time” – set the hold time for the scene

“Input By Out” – this function will store a scene from an external DMX

console. See the next section for scene editing via an external DMX

controller.

Step 1B – Building Scenes from an External DMX Controller

The fixture includes a simple built-in DMX recorder. This recorded allow you to build a scene

using your own DMX console and then send that scene to the fixture to be stored inside one

of the fixture scene storage banks. Many people may find this procedure easier and quicker

than using the on board menu functions as in “Step 1.” To store a scene from an external

DMX controller follow the procedures below:

Using your DMX control build and store scenes as you normally would.

Once you have built all your required scenes, enter the fixtures main menu

and toggle to

Step 2 – Editing Programs.

The control will store a maximum of 10 programs. A program can store one or a maximum of

64 scenes. Keep in mind that a scene can only be access when it is stored inside one of the

10 available programs. Follow the procedure below to build an internal program:

•

Access the main menu and toggle to “Edit Programs” which is menu function 8.

•

Then tap the “ENTER” button and toggle to “Program 1” menu function 8-2-1.

•

When you get to the “Program 1” function tap the “ENTER” button. The screen will

then change to Edit Steps 01, this will be menu function 8-2-1-1. Use the “UP” and

“DOWN” buttons to toggle through the scenes created in “Step 1.” Press the

“ENTER” button to add a scene to the program. Tapping the “Enter” button will

automatically lock the selected scene into the programs’ memory. Repeat the

process until all the desired scenes have been added to the program. Each program

can store a maximum of 64 scenes.