Elation Professional 36 PRO User Manual
Page 23
DESIGN LED 36 Pro™
©Elation Professional, Los Angeles Ca.
22
www.ElationLighting.com
8.3 “MANL” – Manual Fixture Settings:
This function allows the each of the six DMX channels to be controlled manually. This
will allow the fixture to be preset to a specific color or built-in program without the use of
a DMX console.
8.4 “tIME” – Operating Hours
These functions will detail different time functions associated with the fixture.
This function tracks the running time of the fixture from the point it was last cleared.
Where “XXXX ”represents the total number of running hours. This time is none
destructive and will remain in the fixtures memory indefinitely. Use this time to track
rentals or show durations.
Clear run time access code
This lock-out code prevents the current run time from being erased accidently. The
access code is “038”
This function resets the run time to zero.
8.5 “Edit” Internal Program Settings:
The fixture comes equipped with a built-in DMX recorder that allows custom programs to
be installed and recalled directly from the fixture’s control board. Programs can be
created and stored using the fixture’s control board or by using an external DMX
controller. For detailed instructions on how to complete this task please see Section 11/
Page 28.
8.5.1 Select program – This function allows the user to select one of ten of the user
defined built-in programs. This program is then accessed in “Function Mode”
under “Program Run.”