CHASING M2 S Industrial Underwater ROV (328' Tether) - Manual (Page 8)

EN
13 14
EN
Connector Sockets /Tether Connectors 5
Maintenance and Precautions
Navigation Safety 1
Battery Protection 2
Open sea
navigation
Relatively clear
water quality, no
dense seaweed
No dense radio
or radar signals
Do not dive
more than
330 ft
330ft
Charging Protection 3
· Only use the Chasing standard adapter.
· Red light means charging.
· Green light means fully charged.
Do not run out
of battery power
Charge when
power is less
than 25%
When not in use,
keep battery power
at 50% - 70%
Working
temperature
-10 °C ~ 60 °C
( -18°F-140°F)
Thruster/ Propeller 4
a. Do not touch the propellers of the Thruster
b. Do not unlock the Thruster for more than 30 seconds in the air to avoid
overheating
c . After using the ROV in the salt water, please put it in fresh water for about 1
hour and turn it on, let the drone run for10 minutes to discharge the salt,
and try out the water after cleaning with a towel.
· Check the Connector socket and tether pre-dive, keep dry and clean.
Salt and moisture may cause corrosion of the connector. Be sure to wash the
socket with fresh water if
the interface has water stains, and make the connectors dry after cleaning.
Specifications
ROV
Size
Weight
Battery
Maximum Depth
Maximum Speed
Battery Life
Battery Cycle
Operating
Temperature
15*10.5*6.5 inch
4.5kg
97.68Wh
328 ft
1.5 m/s (3 Knots)）
≤4h (Depend on working
condition)
>300times
14℉~113℉
Tether & Winder
328ft Version (100M)
656ft Version(200M) 1.8kg
2.5kg
Adapter
Adapter
ROV Charging time
Remote controller
charging time
2.9A/25.2V
2.5h
2h
Dimmable LED Lights
Brightness
Color Temperature
CRI
Dimming 2 x 2000lm
5000K~5500K
85
Three adjustable
Sensor
IMU
Depth Sensor
Temperature Sensor
Three-axis gyroscope
acceleration
compass
＜±0.25m
＜±2℃
Remote Controller
Size
Weight
Battery capacity
Battery life
Wireless
HDMI
TYPE-C
6.3*6.1*4.9 inch
0.685kg
2500mAh
≥6H (Depend on working
condition)
Wi-Fi
1080P
USB communication