Sound modes and surround parameters, P. 221) – Denon AVR-S660H 5.2-Channel Network A/V Receiver User Manual
Page 221
z
1 This item can be selected when a Dolby TrueHD signal is played.
z
2 This item can be selected when a Dolby Digital, Dolby Digital Plus, Dolby TrueHD or DTS signal is played.
z
3 This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played.
z
4 This item cannot be set when “Dynamic EQ” is set to “On”. (
z
5 This item cannot be set when Audyssey
®
Setup (Speaker Calibration) has not been performed.
z
6 This item cannot be selected when the Dolby TrueHD or DTS-HD input signal sampling frequency exceeds 96 kHz.
z
7 This item cannot be set when “MultEQ
®
” is set to “Off”. (
z
8 This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.
z
9 This setting is available when “Subwoofer Mode” in the menu is set to “LFE+Main”. (
z
10 This item can be set when “Front” is set to “Small” or “Subwoofer Mode” is set to “LFE+Main”. (
221