Denon AVR-S660H 5.2-Channel Network A/V Receiver - Manual (Page 152)

9
Move the Sound calibration microphone to position 2,
select “Continue”, then press ENTER.
The measurement of the second position starts.
Measurements can be made in up to six positions.
.
Place the microphone ear level at the 2nd
listening position, which should be no more
than 2ft (60cm) away from the 1st position,
then select
“Continue”...
Continue Back
Audyssey Setup
Ear Height
n Stopping Audyssey ® Setup
A
Press BACK to display the popup screen.
B
Press o to select “Yes”, then press ENTER.
10
Repeat step 9, measuring positions 3 to 6.
0
To skip measuring the fourth and subsequent listening position, press o to
select “Complete” and press ENTER to proceed to step 12.
11
Select “Continue”, then press ENTER.
.
Audyssey Setup
Continue Repeat Last Test
Measurements Complete.
Select “Continue” to analyze the data...
Start the analysis and storage of the measurement results.
0
Analysis takes several minutes to complete.
The more speakers and measurement positions that there are,
the more time it takes to perform the analysis.
NOTE
0
When the measurement results are being saved, make sure the power is
not turned off.
Contents Connections Playback Settings Tips Appendix
152
Front panel Display Rear panel Remote Index