Denon AVR-S660H 5.2-Channel Network A/V Receiver - Manual (Page 157)

Manual Setup
Perform when setting the speakers manually or when changing settings
made in Audyssey
® Setup.
0
If you enable new speakers in the speaker configuration menu after
performing Audyssey
® Setup, you will no longer be able to select
Audyssey MultEQ ® , Audyssey Dynamic EQ ® or Audyssey Dynamic
Volume ® . ( v p. 129)
0
Changing the following settings:
Speaker size (Large or Small) / Distances / Levels / Crossovers settings
will not disable Audyssey
® or require running Audyssey ® Setup again.
0
“Manual Setup” can be used without changing the settings. Please set if
necessary.
Speaker Config.
Select whether or not speakers are present, playback capacity for low
bass frequencies and speaker size.
o Front
Set the front speaker size.
Large
(Default):
Use a large speaker that can adequately
play back very low bass frequencies.
Small:
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
0
When “Subwoofer” is set to “No”, “Front” is automatically set to “Large”.
0
When “Front” is set to “Small”, you cannot set speakers other than “Front” to
“Large”.
Contents Connections Playback Settings Tips Appendix
157
Front panel Display Rear panel Remote Index