Auto-standby, Usage data – Denon CEOL RCD-N10 Network CD Receiver (Black) User Manual
Page 93
Auto-Standby
Sets the amount of time that must elapse without unit operation or an input
signal before the unit goes into standby automatically.
When the input source is “Tuner” and you are listening to an AM
broadcast, the unit automatically goes into standby after approximately
eight hours without operation.
Off:
The unit does not go into standby
automatically.
1min:
The unit goes into standby after 1 minutes.
5min:
The unit goes into standby after 5 minutes.
15min
(Default):
The unit goes into standby after 15 minutes.
Other:
Sets the minutes (between 1 and 99) before
the unit automatically goes into standby.
After setting the amount of time with 0 – 9,
+10 buttons, press ENTER to confirm the
setting.
Usage Data
For product improvement purposes, please send information on the
device settings and operating conditions of the functions to Denon.
Information provided by customers will be used as reference material for
product development purposes in the future.
Denon will never provide any information we collect to third parties.
Yes:
Provide information on the operating status
of this unit.
No:
Do not provide information on the operating
status of this unit.
93