Denon CEOL RCD-N10 Network CD Receiver (Black) - Manual (Page 77)

Switching the display’s brightness
The display brightness can be adjusted between five levels.
1
Press DIMMER.
0
The brightness of the display switches each time the button is
pressed.
0 When “Off” is set, the display turns off temporarily when operating the buttons.
0
The display brightness is set to most brightly by default.
Using the sleep timer
You can have the power automatically switched to standby once a set time
has elapsed. This is convenient for listening while going to sleep.
1
Press SLEEP during playback and select the setting
time.
0 The o indicator on the display lights.
0
The sleep timer can be set to up to 90 minutes, in steps of 10
minutes.
0
After about 5 seconds, the setting is entered and the display
returns to as it was before.
o To cancel the sleep timer
1
Press SLEEP to set “Sleep 1 Off”.
The
o
indicator on the display turns off.
0
The sleep timer setting is canceled when the unit switches to standby mode.
0
To check the time remaining until the sleep timer is activated, press SLEEP.
Contents Connections Playback Settings Tips Appendix
77 Front/Top
panel
Rear panel
Remote control
unit
Index