Eagle Electronics SEAFINDER 500C - Manual (Page 92)

86
2. The Water Temperature box title bar flashes, indicating the box con-
tents can be changed. Press
ENT |
↑ or ↓ to select data type|
ENT | EXIT .
Water Distance has been picked to replace Water Temperature in the
top digital data box.
Tip:
You can customize other digital data boxes before returning to the
Sonar Page. After changing the first box by selecting the Data Type
and pressing Enter, use the
↓ key to select another box to change.
When the selected box title bar flashes, press ENT |
↑ or ↓ to select
data type| ENT . Repeat these steps until you're finished customizing,
then press EXIT to return to the Sonar Page.
Sonar Simulator
This unit has a built-in simulator that lets you run it as if you were on
the water. All sonar features and functions are useable. When in
simulator mode, the unit periodically will display “Simulated” at the
bottom of the Sonar Page. To use the simulator:
1. From the Sonar Page, press MENU | MENU |
↓ to
S
ONAR
S
IMULATOR
| ENT .