Electrolux 66300KF-an - Manual (Page 24)

24
Switching off the safety cut−out function before it
has come to an end
There are two ways to switch off the safety cut−out function before it has
come to an end.
Switch off the cooking zone and timer simultaneously
1. Using the cooking setting selector sensor panel, reset the desired coo−
king zone to zero: the cooking zone and timer will switch themselves off.
Switch off the timer Ċ the cooking zone remains active
1. Select the desired cooking zone using the timer sensor panel. The corres−
ponding control lamp will then flash more rapidly.
2. Using the timer setting sensor panel, set the timer to :
− only the timer will switch itself off.
− the cooking zone will remain in operation.
Countdown timer
To be able to use the countdown timer the appliance must be switched on,
but all the cooking zones must be switched off.
1. Touch the timer sensor panel.
will be shown in the timer display.
2. Set the desired period of time using the or timer setting sensor pa−
nels.
The countdown timer function will be activated after several minutes and
the remaining time will be displayed.
To reset the remaining time, touch the timer sensor panel and change the
setting using the
or sensor panels for setting the timer.
After the set period of time has elapsed an acoustic signal sounds and the
timer display flashes
.
3. To switch off the signal, touch the timer sensor panel.