Electrolux 66300KF-an - Manual (Page 17)

17
Cooking using the automatic warm up function
All of the cooking surface’s four cooking zones can be adjusted to any of
nine settings, and are equipped with an automatic warm up function:
− , lowest cooking setting
− , highest cooking setting
− , automatic warm up function.
When you select the desired cooking setting using the cooking setting
selector sensor panel, the cooking zone will operate at maximum power for
a certain period of time and will then automatically switch back to the fol−
low−on cooking setting that has been set.
The length of time that the automatic warm up function operates depends
on the follow−on cooking setting selected.
1. Touch the cooking setting selector sensor panel to set the desired coo−
king setting from to . The cooking setting that has been set will then
be displayed. After a period of 5 seconds, the (=automatic warm up
function) will appear in the display in place of the cooking setting. After
the warm up period has finished, the cooking setting will once more be
displayed.
If you should choose a higher heat setting while the automatic function is
in operation, e.g. from
to , the period of time that the warm up
function is in operation will be adjusted accordingly. If you select a lower
setting, the warm up period will end immediately.
You can cook using the automatic warm up function only if the cooking
zone is cold or moderately warm. If a cooking zone is already hot when you
switch it on (
indicator), the automatic warm up function cannot be
used.