Electrolux 66300KF-an - Manual (Page 15)

15
3. Touch the triple ring" sensor panel to activate the outer heating ring.
The upper control lamp will illuminate.
4. To switch off the outer heating ring, touch the triple ring" sensor panel,
and the heating ring that is outermost at the time will switch off.
STOP+GO function
When the Stop+Go" sensor panel is actuated all cooking zones that are
switched on are simultaneously switched to the keep warm setting.
The control light for the Stop+Go" sensor panel will illuminate. The keep
warm setting will be indicated in the display with
.
When the Stop+Go" sensor panel is actuated again, the cooking settings
that were previously selected are reset and the control light goes out.
The timer is not stopped by the Stop+Go function.
If an automatic warm up function was selected in the heating up stage
this will be stopped by the Stop+Go function, and the previously selected
cooking setting will be reset by actuating the Stop+Go" sensor panel
again.