Electrolux 66300KF-an - Manual (Page 22)

22
Timer
There are two ways to use the timer:
− as a safety cut−out function. Set a cooking period for a cooking zone,
and after this time has elapsed the cooking zone will automatically
switch itself off. This function can be used for more than one cooking
zone simultaneously.
− as a countdown timer without a cut−out function ("egg timer"), whereby
an acoustic signal can be heard after the set period of time has elapsed.
The countdown timer cannot be used if a cooking zone is switched on.
Safety cut−out
The cooking zone(s) for which you want to use the safety cut−out function
must be switched on.
1. Using the timer sensor panel, select the cooking zone for which the safety
cut−out is to be set.
By touching the timer sensor panel once the first active cooking zone is
selected in a clockwise direction, and the corresponding control lamp will
flash rapidly. Hereby the (e.g.) left rear control lamp corresponds to the left
rear cooking zone.
will appear in the timer display.
The next active cooking zone is selected by touching the timer sensor panel
again.