Canon PowerShot SX70 HS Digital Camera - Manual (Page 247)

„
Changing the Flash Timing
z [1st curtain] is used whenever the shutter speed is 1/100 or faster, even
if you select [2nd curtain].
„
Configuring Safety FE
z Shots may be captured using settings different from the values
displayed when you press the shutter button halfway.
z Continuous Shooting
z During continuous shooting in mode, focus is locked at the
position determined when you pressed the shutter button halfway.
z Shooting may stop momentarily or continuous shooting may slow down
depending on shooting conditions and camera settings.
z As more shots are taken, shooting may slow down.
z There may be a delay before you can shoot again, depending on
shooting conditions, the type of memory card, and how many shots you
took continuously.
z Shooting may slow down if the flash fires.
z Screen display in continuous shooting differs from the images actually
captured and may look out of focus.
z Fewer continuous shots may be available under some shooting
conditions or camera settings.
z Using the Self-Timer
z Even when set, the self-timer has no effect if you press the movie
recording button to start recording.
z More time is required between shots when the flash fires or when you
have specified to take many shots. Shooting will stop automatically
when the memory card becomes full.
247