FujiFilm GFX 50S II Medium Format Mirrorless Camera with 35-70mm Lens Kit User Manual

Page 321

297

echnical Not

Accessories from Fujifi lm

Shoe-mounted fl ash units

EF-BP1

: A battery pack for EF-X500 ﬂ ash units. Takes up to 8 AA batteries.

EF-60

: In addition to manual and TTL ﬂ ash control, this clip-on ﬂ ash unit has a Guide

Number of 60/197 (ISO 100, m/ft.) and supports FP (high-speed sync), allowing it to be
used at shutter speeds that exceed the ﬂ ash sync speed. It can also be used as remote
ﬂ ash under the control of an optional EF-W1 wireless commander.

EF-W1

: With support for the NAS

wireless communication standard developed by

Nissin Japan, this wireless ﬂ ash commander can be used with optional EF-60 clip-on
ﬂ ash units and other NAS-compliant units.
* NAS is a registered trademark of Nissin Japan Ltd.

EF-42

: This clip-on ﬂ ash unit (powered by four AA batteries) has a Guide Number of

42/137 (ISO 100, m/ft.) and supports manual and TTL ﬂ ash control and auto power
zoom in the range 24–105 mm (35 mm format equivalent). The ﬂ ash head can be ro-
tated 90° up, 180° left, or 120° right for bounce lighting.

EF-X20

: This clip-on ﬂ ash unit has a Guide Number of 20/65 (ISO 100, m/ft.). Powered

by two AAA batteries, this light, compact unit features a dial for adjusting TTL ﬂ ash
compensation or manual ﬂ ash output.

EF-20

: This clip-on ﬂ ash unit (powered by two AA batteries) has a Guide Number of

20/65 (ISO 100, m/ft.) and supports TTL ﬂ ash control (manual ﬂ ash control is not sup-
ported). The ﬂ ash head can be rotated upwards 90° for bounce lighting.

Remote releases

RR-100

: Use to reduce camera shake or keep the shutter open during a time exposure.

Stereo microphones

MIC-ST1

: An external microphone for movie recording.

Handgrips

MHG-GFX S

Features an improved grip. The MHG-GFX S is equipped with a rail for

quick-shoe camera mounts.

Grip belts

GB-001

: Improves grip.

Body caps

BCP-002

: Cover the camera lens mount when no lens is attached.

instax SHARE printers

SP-1/SP-2/SP-3

: Connect via wireless LAN to print pictures on instax ﬁ lm.