Shooting stand by mode, Auto power save, Auto power off temp – FujiFilm GFX 50S II Medium Format Mirrorless Camera with 35-70mm Lens Kit User Manual
Page 258
234
T
he S
etup M
enus
8
POWER MANAGEMENT
SHOOTING STAND BY MODE
Choose the delay before the camera enters shooting standby
mode.
Option
Option
Description
Description
5 MIN
The camera will suspend all functions and enter power-
ing-saving (standby) mode if no operations are performed
for the selected period. To exit shooting standby mode, press
the
MENU/OK
button or another control.
2 MIN
1 MIN
30 SEC
15 SEC
OFF
Shooting standby mode disabled.
AUTO POWER SAVE
If
ON
is selected, the display frame rate will drop to save power if
no operations are performed for a short period, but the normal
frame rate can be restored by operating camera controls.
Options
Options
ON
OFF
AUTO POWER OFF TEMP.
If its temperature rises beyond a certain point, the camera will fi rst
display a message and then, if the temperature rise continues, auto-
matically end shooting and power down. Choose the temperature
at which the camera turns off automatically.
Option
Option
Description
Description
STANDARD
The camera turns off automatically when its temperature reach-
es the
STANDARD
value.
HIGH
Shooting can continue at temperatures higher than the
STANDARD
value, extending the time available to record
movies and the like. Because remaining in contact with the
camera at these high temperatures could result in low-tem-
perature burns, this option should only be used after mounting
the camera on a tripod or taking other steps to avoid prolonged
contact with the camera.