Emulex 375 - Manual (Page 54)

E MULEX M ODEL 375 SAN S TORAGE S WITCH
U SER ’ S G UIDE C HAPTER 3: S WITCH M ANAGEMENT
E MULEX C ORPORATION 51
P ART N UMBER 00041369-002 R EV . B
SOC Status • OK (green)–the switch chipset is operating normally.
• Fault (red)–the switch chipset’s selftest has failed.
Enclosure Temperature • OK (green)–the switch temperature is within the normal operating
range.
• OverTemp (red)–the enclosure temperature has exceeded the
recommended operating range.
Fan #1 • OK (green)–the fan unit is working properly.
• Not Present (yellow)–the power supply/fan module has been
removed.
• Fault (red)–the fan unit has stopped operating. Verify that the power
supply/fan module is properly seated in the switch.
Fan #2 • OK (green)–the fan unit is working properly.
• Not Present (yellow)–the power supply/fan module has been
removed.
• Fault (red)–the fan unit has stopped operating. Verify that the power
supply/fan module is properly seated in the switch.
Power Supply #1 • OK (green)–the power supply unit is working properly.
• Not Present (yellow)–the power supply/fan module has been
removed.
• Fault (red)–the power supply unit has stopped operating. Verify that
the power supply/fan module is properly seated in the switch.
Power Supply #2 • OK (green)–the power supply unit is working properly.
• Not Present (yellow)–the power supply/fan module has been
removed.
• Fault (red)–the power supply unit has stopped operating. Verify that
the power supply/fan module is properly seated in the switch.
Item Status Indicators