Electrolux B9879-4 - Manual (Page 45)

45
5. Spray oven cleaner spray inside the oven interior.
After another 5 mins. another signal sounds for 2 minutes. By this time
the spraying should be finished. (After this point the oven would al-
ready have cooled down too much).
The time the oven cleaner spray needs to be left to work depends on
the manufacturer’s instructions.
3
The acoustic signal can be deactivated by pressing any button.
6. Wipe out the oven.
Performing Pyroluxe cleaning
1
Warning: The oven gets very hot during this process. Keep small chil-
dren away.
1
Important Before carrying out the pyrolytic cleaning process, all re-
movable parts,
including the side rails, must be removed from the oven.
3
The oven runners must be removed before the start of pyrolytic
cleaning. If the oven shelf runners are still in position C1-REMOVE
RUNNERS appears in the display. The Pyroluxe process then cannot be
started due to a safety cut-out that protects the oven shelf runners.
Performing Pyroluxe cleaning
1. First remove the worst of the residue manually.
2. Using the OPTION
button, change to the Options menu.
3. Using the arrow buttons
or
select the menu op-
tion CLEANING MENU.
4. Confirm using the OK
button.
__ _ __
CLEANING MENU
э э э эю эю э э э
э
э
э э
888ыc ю юью1ь5.0ь5 э
88.8ъ8
wPmP¸¹º»¼-+
_ __
PYROLUXE MENU
э э э эю эю э э э
э
э
э э
888ыc ю юью1ь5.0ь5 э
88.8ъ8
wm¸¹Pº»¼-+