Extron electronic MDA 3 Series - Manual (Page 6)

VersaTools ® MDA 3 Series • Installation VersaTools ® MDA 3 Series • Installation
VersaTools ® MDA 3 Series, cont’d
(2) 4-40 x 3/16" Screws
Use 2 mounting holes on
opposite corners.
VersaTools Rack Shelf
1/4 Rack Width False Front
Face Plate
DIS TR IB UT IO N A MP LIF IE R
DIS TR IB UT IO N A MP LIF IE R
DIS TR IB UT IO N A MP LIF IE R
Figure 1 — Rack mounting the MDAs on a
VersaTools rack shelf
DIS TR IBU TIO N A MP LIF IER
DIS TR IBU TIO N A MP LIF IER
DIS TR IB UT ION A MP LIF IER
MD A S ER IES DIS TRIB UTIO N A MPL IFIE R
Figure 2 — MDAs mounted on a standard rack
shelf
Installation
The MDA 3 Series mini distribution amplifiers (DAs) can be
mounted on a rack shelf, to a rack without a shelf, under a desk
or tabletop, or on a projector bracket.
Rack mounting
For optional rack mounting, mount the MDA on any of the
following rack shelves:
• RSF 123 VersaTools ® rack shelf kit (part #60-190-20)
(figure 1)
• RSB 123 VersaTools rack shelf (part #60-604-20)
• RSU 126 6" deep universal rack shelf kit (part #60-190-10)
• RSB 126 6" deep basic rack shelf (part #60-604-10)
• RSU 129 1U universal rack shelf kit (part #60-190-01)
(figure 2)
• RSB 129 1U basic rack shelf (part #60-604-01)
On the standard rack shelf, the MDA mounts in one of four
locations to the rear of the rack or in one of four locations to the
front of the rack.
1 . If feet were previously installed on the bottom of the
MDA, remove them.
2 . Mount the MDA on the rack shelf, using two 4-40 x 3/16"
screws in opposite (diagonal) corners to secure the MDA
to the shelf.
3 . Install blank panel(s) or other unit(s) to the rack shelf.
Only products in the VersaTools line can be mounted to a
VersaTools shelf. Any 1U rack-mountable Extron
product can be mounted on the standard shelf.
3 2